fallout 3 pip boy 3000 3d models
779606 3d models found related to fallout 3 pip boy 3000.pinshape
The most accurate version available. Fits Phones 140.5mm x 70.5mm x 9mm. Requires: - Velcro strap - #4 x 1/4 inch screws - 8 magnets Build area larger than 145mm x 95mm x 200mm required. ... FOR PERSONAL USE ONLY, DO NOT SHARE OR...
myminifactory
Fallout 3 Pip-boy 3000 Fits Phones 140.5mm x 70.5mm x 9mm. Requires - 8x 8mmx3mm Round magnets - 2 hook and loop straps - #4 x 1/4 inch screws - Sanding and painting of course Build area larger than 145mm x 95mm x 200mm required. ... FOR...
thingiverse
Made a display stand for my Spirit Halloween Pip-Boy 3000 MKIV. ... trev502000 made a wonderful text plate for the Pip-Boy 3000 MKIV. You'd just need to resize it to fit. ... https://www.thingiverse.com/thing:997049
prusaprinters
<p>Found this over at Pepakura.com and thought it was cool. I've thickened the shells and split it up where possible, so it should be ok to print. ...But is untested, "so as always" please check you are happy with the files before you go ahead and...
thingiverse
Found this over at Pepakura.com and thought it was cool. I've thickened the shells and split it up where possible, so it should be ok to print. ...But is untested, "so as always" please check you are happy with the files before you go ahead and print,...
thingiverse
Mi Band 6 Fallout Pip-Boy 3000 Mini Little project I did for my cosplay. Parts should fit together. All you have to do is print it, get small flexible part (I got it from Aliexpress for another Mi band strap but I think its possible to print it,...
thingiverse
It was made by Y-Tec 3d Link to Y-Tec: http://ytec3d.com/pip-boy-3000-mark-iv/ It is incredibly accurate to the game and they have spent a lot of time working on it. If you like it then go to their donations page (on the website.) and donate. For any...
thingiverse
Pip boy 3000 Instructions Print both parts, then join them with 4 little screws. ...No supports need.
grabcad
I am going to start uploading a project of mine every other week. ...To kick things off, check out a Pip Boy from the Fallout game series. Hope you enjoy. ...Email for a copy in SolidWorks - andruswi@wsdstudent.net
thingiverse
To hold the two halves of the pip-boy together I used black rubber bands meant for hair. You should be able to find them at Wal-Mart or CVS. As a soft liner I just used a scrap of old t-shirt rolled over a few times. ...For the image on the screen just...
thingiverse
Pip-Boy 3000 MK IV From http://ytec3d.com/pip-boy-3000-mark-iv/ Grats http://www.thingiverse.com/dragonator, I'm just using it for make it easy for me to print it. ...It's not mine design.
grabcad
Pip-boy 3000 Mark 4 and holodisk CAD models.(not yet ready for 3d-print)Update coming...
thingiverse
a Screen for the pip boy 3000 Mk IV made for phones by Y-Tec 3d
thingiverse
I was making this to go with the Pip-Boy 3000 done by dragonator. That is why I added it as a remix. I think I am close. I was going off the one I had by Zook_one. It did not come out exactly like his. But i think it is a good version of the...
thingiverse
15-12-2015 mainly cut into smaller parts to prevent over hang and long printing time. ...BTW. thanks to lilykill's amazing work! 17-12-2015 updated link_a, REAR BODY_2 and REAR BODY_3 . ...make the extrude smaller to easier fit in other parts.
thingiverse
Dragonator has an awesome build for the Fallout Pipboy 3000 Mk 4 (at http://ytec3d.com/pip-boy-3000-mark-iv/). However the button at the top isn't functional and he used a toggle switch to enable the LEDs. I used his button and made it so there fits...
thingiverse
I DID NOT PULL THIS FROM FALLOUT! ...This was made from a Pip-Boy I had ordered. ...Although it looks good it's not done.
thingiverse
remix of Pip-Boy 3000 for Iphone 5 by b761d67, remix of Pip boy 3000 by cpregnan, Note: Iv'e been told that a few of my measurements are incorrect. such as the faceplate screen size, i haven't had a chance to correct them yet I have scaled all the...
thingiverse
This is a Stand for the Pip-boy 3000 Mark IV project, the text is made with copper PLA oxide with vinegar and salt. The files are made for de 115% version of the Pip-boy so you might scale it down for other sizes. Text was made from...
thingiverse
This is a Pip-Boy 3000 that I have remade to be more like the Pip-Boy 2500 but still look like the 3000 model. There is also a full version if you want to print that instead. ( Faceplate is the arm version while Face_plate is the other one ) I...
thingiverse
Source from https://ytec3d.com/pip-boy-3000-mark-iv-assembly/ 115 version Ytec的模型非常好,细节非常完善,但就是零件太多,组装比较困难,打印要分太多件。 尤其是几个铰链和卡扣,我的机器打印出来效果非常差。并且由于ABS的收缩变形,很难进行组装。 于是我按照Ytec 115(最大的版本)的轮廓,重新做了一个比较粗糙的版本。除了一些按钮,只需要打印两部分,而且只需要少量支撑。 Ytec's model is very...
thingiverse
I don't know if I'd have been able to make this if it weren't for CPregnan (https://www.thingiverse.com/cpregnan) and his model of the Pip Boy 3000 (https://www.thingiverse.com/thing:349267) . I may not have been able to (or maybe I just didn't...
thingiverse
I've combined the side pieces from the front left side of the pip boy done by Dragonator (http://www.thingiverse.com/thing:109716/#files) I take no credit in designing the models that I combined. I did it just to make the assembly of Dragonator's...
thingiverse
Wanted to come up with another design for a badge holder but I didn't step back to check on my work and accidentally a whole Pip-Boy... But flatter. Didn't use it for the convention but I liked how it turned out so maybe someone will get some use out...
prusaprinters
Wanted to come up with another design for a badge holder but I didn't step back to check on my work and accidentally a whole Pip-Boy... But flatter. Didn't use it for the convention but I liked how it turned out so maybe someone will get some use out...